Thingiverse
Quick Change Mount CoreXY Linear Rail
von sheljay888
19
Downloads
6
Likes
0
Makes
Quick change CoreXY Linear Rail mount with ADXL345 mount and an adjustable BLTouch Bracket.
Also a Quick Change adaptor for the BIGTREETECH/ZS YONG 3 in 1 out Hotend.
Uses 5015 blower fan for part cooling.
Theres 4 different versions.
-QckChange_Support_LinRail_CoreXY_ADXL_BLT.stl has the lever support tower that needs to be manually removed after printing, BLTouch mount, ADXL mount and the endstop riser
-QuickChange_LinRail_CoreXY_ADXL_BLT.stl has everything but the support pillar. it needs to be manually added
-QuickChange_LinRail_CoreXY.stl is just the mount with x endstop pillar. Endstop can be mounted on back left. needs manual support pillar in center
-QuickChange_LinRail_CoreXY_Left_Endstop.stl endstop on left. Manually add support pillar
Right_rail_upper_XYStop+Cable.stl is an edit of the original that has mounts for the X and Y Endstop. The X endstop needs the plastic housing that the stock Y endstop used and the y needs Y_Endstop_Plate.stl screwed into brynam
Also a Quick Change adaptor for the BIGTREETECH/ZS YONG 3 in 1 out Hotend.
Uses 5015 blower fan for part cooling.
Theres 4 different versions.
-QckChange_Support_LinRail_CoreXY_ADXL_BLT.stl has the lever support tower that needs to be manually removed after printing, BLTouch mount, ADXL mount and the endstop riser
-QuickChange_LinRail_CoreXY_ADXL_BLT.stl has everything but the support pillar. it needs to be manually added
-QuickChange_LinRail_CoreXY.stl is just the mount with x endstop pillar. Endstop can be mounted on back left. needs manual support pillar in center
-QuickChange_LinRail_CoreXY_Left_Endstop.stl endstop on left. Manually add support pillar
Right_rail_upper_XYStop+Cable.stl is an edit of the original that has mounts for the X and Y Endstop. The X endstop needs the plastic housing that the stock Y endstop used and the y needs Y_Endstop_Plate.stl screwed into brynam
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!