Thingiverse

Quick Change Sanding Blocks

di Cavedog

1.1k Download

620 Likes

0 Makes

Vai al Modello

This is a quick change sanding block I designed. To use this tool:

- cut the sand paper to the length described below
- place the bottom of the sanding block on the center of the sand paper
- wrap the edges of the sand paper up sides and around the top round edges
- press the tensioning block down from above, this will snap into place and tension the sand paper

To replace the sand paper:

- Slide the tensioning block out sideways

These are 3.7" long in order to use a standard 3.7" x 9" precut sand paper piece. Paper cut length for the 2" wide block is 4.5" (half sheet), cut length for the 1" block is 3.5".

This can be printed with an 0.6mm nozzle, however I recommend a 0.4mm nozzle.

sander Sanding sanding block sanding tool sanding tools sandpaper supportless wood woodworking woodworking tools sander Sanding sanding block sanding tool sanding tools sandpaper supportless wood woodworking woodworking tools sander Sanding sanding block sanding tool sanding tools sandpaper supportless wood woodworking woodworking tools

Fonte

Thingiverse

Cosa serve per stampare: Principiante Bassa affidabilità

Perché?

senza supporti

Senza supporti Pezzo unico

Supporti 0/3

Assemblaggio 0/3

Impostazioni 1/3

Dimensioni piano 0/3

Post-lavorazione 1/3

Stampante