Thingiverse
Quick-Swap Brushless Motor Mount
par toader
1
Téléchargements
1
Likes
0
Makes
This design makes swapping and mounting brushless motors quicker and easier.
I printed it in PLA using a 0.2mm layer height. The tolerances are fairly forgiving, so it should print well on most 3D printers.
You'll need to make a locking pin using metal wire with a diameter between 2.3mm and 3.3mm. Make sure to bend the pin as shown in the reference image—this creates a cam action when rotated, tightening the two parts together and eliminating any movement.
Here is a video of it. https://youtu.be/iqCApi7Uga8
I printed it in PLA using a 0.2mm layer height. The tolerances are fairly forgiving, so it should print well on most 3D printers.
You'll need to make a locking pin using metal wire with a diameter between 2.3mm and 3.3mm. Make sure to bend the pin as shown in the reference image—this creates a cam action when rotated, tightening the two parts together and eliminating any movement.
Here is a video of it. https://youtu.be/iqCApi7Uga8
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !