Quick To Print Large Vice

Quick To Print Large Vice

Notes:
This design is primarily a good starting point for remixes and the OBJ files have been included

print Settings:
nozzle diameter: 0.40mm && 1.0mm
layer height: 0.20mm && 0.75mm
infill: 25%
support: Yes only small amount though
walls: 4 && 2
top and bottom layers: 3 to 4
material: PLA


Parts Needed:
NONE

Special Instructions:
print both the screw and nut with 0.2mm resolution on a 0.4mm nozzle
print the nut at 102% scale
file the screw ever so slightly where the layers start and end to clean up the edges
print the vice body 0.75mm resolution on a 1.0 mm nozzle
print the vice jaw with support in the cut out for the nut


please feel free to leave comments and feedback
please checkout my other designs:
https://www.thingiverse.com/carter_383/designs

please also consider donating a small amount to help allow me to turn this into a carer or please just leave me a comment with any advice on hoe