QuickClamp

Ever struggled with a G-clamp to secure something to your work bench? No more struggles with the QuickClamp! Simply place the clamp over your object and slide them over the bench's edge. Quick... Easy... Secure!!!
I have created a multitude of different sizes clamps. There should be one for your purpose!

How to select a clamp:
Add the thickness of your bench or table top to the thickness of the object to be clamped and select the clamp with that number. For example, my desk top is 29mm thick and the object is 4mm thick - So I use a 33 Clamp (28+4=33).

Material:
I've found ABS or PETG is the best. It needs material with some flexibility and PLA has a tendency to break before it bends.

Printing:
For optimum strength and rigidity I use 5 solid top layers, 5 solid bottom layers, 5 perimeter shells and 50% infill. No cooling. No supports.

Problem - too tight:
- Sand off some of the inside of the top square and bottom curvature (open up the gap a bit)
- Print with fewer sol