Thingiverse
QuinLED Dig Quad Controller PSU Mount
von derikwhittaker
48
Downloads
15
Likes
0
Makes
Simple to print, print face down.
This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell).
The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting.
Mounting Hardware:
2x - M4 - 8mm bolts (secure mount to PSU)
4x - M3 - 12mm bolts/nuts (secure controller to mount)
This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell).
The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting.
Mounting Hardware:
2x - M4 - 8mm bolts (secure mount to PSU)
4x - M3 - 12mm bolts/nuts (secure controller to mount)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
