QuinLED Dig Uno - 3x Mount

This mount is designed to fit 3 Dig-Uno Controller boards, this will allow higher density in your box.

This PSU Mount is designed to fit the standard hole dimensions for Meanwell LRS 350, Generic PSU, and Meanwell LRS 600

The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting. Will include 4 3mm offset spacers to be used between the controller and the mount to allow for the controller to be raised off of the mount surface.

Mounting Hardware:
2x - M4 - 8mm bolts (secure mount to PSU)
12x - M2 - 12mm bolts/nuts (secure controller to mount)
12x - 3mm Spacers (provided by us)