quset3收纳盒Quest3 Storage Box

quest3是一款非常经典的VR头显设备，电商平台各类收纳盒都很多，但基本都是基于头显或者手柄本身的。像本人不喜欢拆装，于是安装好第三方包含电池的头戴后，就不想为了放入收纳包中而拆下头戴。玩具，当然是为了娱乐方便和放置方便。于是萌生了自己设计一个收纳盒的想法。经过尺寸测量，最终确定了本版本的收纳盒。盒子包含盒体和盖子，连接方式采用磁吸方式，使用8枚直径5mm厚度3mm的圆形磁铁，模型挖的8个圆孔直径为3.2mm（公差0.2mm）,厚度为2.9mm（留磁吸位置），打印后磁铁可借助老虎钳压入，非常紧实。鉴于盒子尺寸较大，在盒体（底部）、盖子（顶部）采用了榫卯结构，分开打印用胶水粘连（这里侧面未留，是为了方便安装，因为盒子厚度10mm左右，有了底部和顶部的榫卯结构，已经很牢固）。总体来看，盒子比较大，主要用于放在家中收纳，携带不够方便。若携带出游，还是建议拆头戴放电商平台的收纳包，或者直接不拆也可以，单独放在一个袋子中（避免与其他东西混装而碰撞）也可。 Quest 3 is a very classic VR headset device. There are many storage boxes on e-commerce platforms, but most of them are based on the headset or controller itself. I don't like disassembling and assembling, so after installing a third-party headset that includes a battery, I don't want to remove the headset just to put it in the storage bag. Toys, of course, are for entertainment convenience and easy placement. So I came up with the idea of designing my own storage box. After measuring the dimensions, the storage box for this version was finally determined. The box consists of a body and a lid, connected by magnetic attraction using 8 circular magnets with a diameter of 5mm and a thickness of 3mm. The model has 8 circular holes with a diameter of 3.2mm (tolerance of 0.2mm) and a thickness of 2.9mm (leaving magnetic attraction positions). After printing, the magnets can be pressed in with pliers, making them very tight. Due to the large size of the box, a mortise and tenon structure was adopted for the box body (bottom) and lid (top), and adhesive was used to separate printing (the side was not left here for easy installation, as the box thickness is about 10mm, and with the mortise and tenon structure at the bottom and top, it is already very sturdy). Overall, the box is relatively large and mainly used for storage at home, making it inconvenient to carry. If carrying it for travel, it is still recommended to open the storage bag on the e-commerce platform, or it can be left unopened and placed separately in a bag (to avoid collision with other