QX105 Frame

User taurelis asked if I could design a QX 105 frame so I thought I'd give it a shot. This is what I came up with. I have not moved the electronics from my carbon fiber frame, but I have made sure the motors fit and the props will clear. You will need to transfer the camera mount and top plate and, I imagine, do a little sanding to get everything to fit. I designed a hole at the bottom of the motor mounts to secure the motors with a servo screw. You may not need this depending on your printer. I have not flown this so cannot vouch for the strength or weight. Let me know if you try it.
UPDATE: I got some feedback from Taurelis and have pushed out the nose a bit and added posts to hold the battery and a bracket for the LEDs. Have also created a prop guard.
UPDATE #2 8-14-17: Had an incorrect measurement - this is corrected file (I hope!)
Update 8-15-17: Taurelis reported that the frame was too heavy. Latest version has about 5 grams removed. Not sure if this will work, but I suggest