Thingiverse
QX13 Butt-Can Stem
von Jonquilmusic
1
Downloads
1
Likes
0
Makes
QX13 BUTT-CAN ADAPTOR STEM
Please see http://www.thingiverse.com/thing:2220336 for an example of a TOP to this project! Also, a close approximation of the can is provided in that file for educational modeling purposes.
This is a stem/post for an “Eagle Butt-Can” Model 1200 and 1206. The old one was damaged. The parts list:
- QX13 Can Cover: (Adaptor Plate!) Insert two 6mm Hex Head bolts about 40mm long from the bottom, affix to Eagle Butt-Can (Model 1200 and 1206 work, for sure!) using two 5mm self-taping sheet-metal screws, or similar. Be sure to print 2 walls (3 total)!
- QX13 Mound: After the remaining pieces are assembled and ready to mount, this is placed on top of the 6mm bolts protruding from mounted Can-Cover, and affixed with 6mm Wing Nuts. It has the first section of the stem built right in! Be sure to print 2 walls (3 total)!
- QX13 Stem a: Print TWO of these for the next two sections. I didn’t require any glue, they fit so good! Place on a flat surface, l
Please see http://www.thingiverse.com/thing:2220336 for an example of a TOP to this project! Also, a close approximation of the can is provided in that file for educational modeling purposes.
This is a stem/post for an “Eagle Butt-Can” Model 1200 and 1206. The old one was damaged. The parts list:
- QX13 Can Cover: (Adaptor Plate!) Insert two 6mm Hex Head bolts about 40mm long from the bottom, affix to Eagle Butt-Can (Model 1200 and 1206 work, for sure!) using two 5mm self-taping sheet-metal screws, or similar. Be sure to print 2 walls (3 total)!
- QX13 Mound: After the remaining pieces are assembled and ready to mount, this is placed on top of the 6mm bolts protruding from mounted Can-Cover, and affixed with 6mm Wing Nuts. It has the first section of the stem built right in! Be sure to print 2 walls (3 total)!
- QX13 Stem a: Print TWO of these for the next two sections. I didn’t require any glue, they fit so good! Place on a flat surface, l
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!