QX90C whoop replacement

This is a direct replacement for turning your QX90C into a whoop.
There is also one with holes for standoffs for camera mounting and I also added a plate to mount the camera for those of you without the carbon fiber version.


Any 40mm Triblade prop is the only thing you will need to get.

I printed it ABS with 20 percent infill

It comes in .5 grams lighter than my orginal QX90C with the prop protectors on.

Weight not including battery is 39.145

I prefer to use the tenergy 380 MAH 25C

https://www.amazon.com/Tenergy-380mAh-Battery-Hubsan-Spider/dp/B00HS5Y6G4/ref=cm_cr_arp_d_product_sims?ie=UTF8

for the snappiest flights but the stock battery works just fine. I have used anything from 680 MAH to the 380. I get over three minutes flight with even the 380 MAH.

I used the original camera holder from the QX90. I simply drilled a tiny hole in the rubber band mounts on the new whoop frame and screwed the old standoffs on. Without those standoffs and the little