R/C - Swampboat

Update the mounts for the rudder, they were not stiff enough, as well as the mount for the motor, also optimized the cooling for the motor.

_____________________________________________________________________


You need to print every part once, except for the skids (Sumpfboot_Kufe_xxx) those you need 2 of each and click them together with the dove tails (could not make them as one piece, because my printbed is only 200x200 mm).

Other parts you need:

14 x locking nuts M3 (insert them into the bottom side of the mounting plate)
14 x washers for M3 bolts
12 x M3x12 bolts (rudermount + motor)
4 x M3x10 bolts (motor mount)
2 x M3x8 bolts (servo mount)

6 x locking nuts M2.5
7 x washers for M2.5 bolts (the 7th one is for mounting the servo onto the guide)
6 x M2.5x8 bolts

1 x Motor Multistar Elite 2204-2300KV (that is the one, for which the holes on the motor mount fit) https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=70353
1 x fitting ESC for the