Thingiverse
R2-D2 middle leg
25
Download
24
Likes
0
Makes
Print with cylinder side down for best fit into the figure's bottom hole.
My figure is a telescoping ESB R2-D2 and the hole tapers from 13.85-12.5 mm, so I used a 13.25 diameter and it seems to fit well. YMMV.
I used a 5mm brim for better stability as the base is pretty small.
Supports >60 deg recommended
50 mm/s speed
0.2 layer height gives pretty good detail.
My figure is a telescoping ESB R2-D2 and the hole tapers from 13.85-12.5 mm, so I used a 13.25 diameter and it seems to fit well. YMMV.
I used a 5mm brim for better stability as the base is pretty small.
Supports >60 deg recommended
50 mm/s speed
0.2 layer height gives pretty good detail.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!