R2D2 12-wire splip ring interface

GeneralHere is an adapter to mount the Fused 12 Wire Slipring Interface from Printed-Droid to the dome of your R2D2 (or other droids) with screws.Simply print out the file, melt in four fusible sleeves and fix the board with four M3x6mm screws.Ideally, first drill two holes in the desired position in the dome (I used the dome inner ring) and then fix with two suitable M3 (variable length) screws.Part ListTypeQuantityUsed forLinkFused 12 Wire Slipring interface1 Fused 12 Wire Slipring Interface R