R2D2 - HueForge 200x200

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA CF BambuLab Grey Transmission Distance: 1.3 “Attention” PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Charcoal At layer #4 (0.4mm) swap to Grey At layer #10 (0.88mm) swap to Ash Gray At layer #21 (1.76mm) swap to Ivory White for the rest.