Raaco Tray Divider Compartment

Summary Updated with V2 and variants: Wall and Floor thickness reduced. Depth reduced to 18mm total Brace thickness increased so raise height in draw (sits higher on dividers) Variants: Variants are available with 3, 6 and 12 compartments. I would suspect that no more than 6 compartments would be useable, but included in case someone has a need. Note: Pictures of printed model are v1 - depth slightly reduced from pictures. Original Description Remodelled with larger spacing between compartments, to allow it to sit on top of the physical dividers installed into a Raaco component draw. Results in 6 compartments for components - 3 from the 3d printed part and 3 from the divider function themselves. Note that they always sit at the same depth due to hooking onto the dividers, but there isn't that much space in the bottom compartments, so very definitely for small component storage. I will probably generate some more variants at different depths so you can choose. Instructions: Simply insta