Thingiverse
RaceBox Micro + Battery Enclosure
di bashir0505
0
Download
0
Likes
0
Makes
This enclosure has dimensions of Length: 60mm, Width: 40mm and Height: 28mm.
I printed all 3 parts using white PLA, which could turn yellow over time. This allows the LEDs to bleed through the case. Feel free to try other colors or transparent.
All parts can be printed with the wide face down and without supports.
Parts Needed:
A Racebox Micro
TP4056 Battery Charger Module, off Amazon.
Tact Tactile Push Button Switch Cap off Amazon. I purchased as a kit with 12x12x7.3mm Push Button switch.
SS12D10 Toggle Switch off AliExpress.
2 M2 screws and screw inserts to hold the Racebox down + 3 M3 screws and screw inserts to fasten the base to the enclosure. Purchased a screw kit and an insert kit off Amazon.
MakerHawk 3.7V 1,100mAh LiPo Battery off Amazon. Larger batteries may not fit. The Racebox Mini uses 1,100mAh.
On my print, I added the word "FORWARD" to the front of it using the Slicer. The stl files are plain so you can add whatever labels you'd like to yours.
The way I
I printed all 3 parts using white PLA, which could turn yellow over time. This allows the LEDs to bleed through the case. Feel free to try other colors or transparent.
All parts can be printed with the wide face down and without supports.
Parts Needed:
A Racebox Micro
TP4056 Battery Charger Module, off Amazon.
Tact Tactile Push Button Switch Cap off Amazon. I purchased as a kit with 12x12x7.3mm Push Button switch.
SS12D10 Toggle Switch off AliExpress.
2 M2 screws and screw inserts to hold the Racebox down + 3 M3 screws and screw inserts to fasten the base to the enclosure. Purchased a screw kit and an insert kit off Amazon.
MakerHawk 3.7V 1,100mAh LiPo Battery off Amazon. Larger batteries may not fit. The Racebox Mini uses 1,100mAh.
On my print, I added the word "FORWARD" to the front of it using the Slicer. The stl files are plain so you can add whatever labels you'd like to yours.
The way I
bashir0505 pubblica anche su
2 modelli aggiuntivi su altre 2 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
