RacerX Hueforge

Project: RacerX.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 162.86x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.84mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ffe17f PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Ash Gray At layer #12 (1.04mm) swap to Red At layer #18 (1.52mm) swap to Lemon Yellow At layer #20 (1.68mm) swap to Ivory White for the rest.