Racing Quad X-Frame (Multi-size)

I have simple x-frame designs for multiple prop sizes. The frame thickness varies, but is designed for strength in normal flight movement. Screw holes are not designed into the frame due to the nature of printing and weak spot generation. Screw hole starter locations are marked and will need to be drilled with 2mm and 3mm drill bits.

The canopy is specifically designed for the RunCam Micro Swift 2 (or clones), but any camera with a 19mm width will fit. The canopies are all the same and will fit their corresponding frames, but will also fit any frame that has a 28.5mm x 28.5mm standoff hole pattern.

The LED bracket is designed to be used with the HGLRC W2812B LED/Beeper combo board. No glue is needed and the LED/beeper can be mounted into the bracket after wiring is soldered to the main flight board.

The frame and canopy are designed to be used with aluminum standoffs. Printed standoffs would have a higher likelihood of failure during flight, but could be engineered to work eff