Slicer Discord
Racing Wheel Stand – 3D-Druckmodell von Thingiverse Thingiverse

Racing Wheel Stand

von thastark
99 Downloads
80 Likes
0 Makes
Zum Modell
XBox Racing Wheel stand for Thrustmaster Racing Wheel Ferrari 458. Likely can be adapted to other wheel types/brands.

Red parts were printed with Alloy910.

Black parts were printed with PETG.

All code provided in OpenSCAD.

Some notes / thoughts:
- The feet are wrapped with a mouse pad cut to fit. Used double sided tape to wrap around foot and screwed on the fabric covers to fasten.
- Code is what it is, not exactly enterprise quality but included for your enjoyment.
- Should be easy to swap out aluminum tubes for cheaper stuff like broom handles by modifying OpenSCAD.
- Although the threads in the front axis & peddle attachment are included in the STL's they don't print well enough to function. I drilled them with an M10 tap.
- You can print the screws or use an M10. I found the printed screws worked for the peddle attachments, front axis & telescopic tube but did not work for the wheel attachment (Alloy910 broke when tightened).
- I included supports in the STL
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PETG
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

3 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen