K2 Plus PTFE Extruder Fix and Cable Clips

V3 is done, corrected some issues from V2, shortened the head a bit and probably over polyed it....high poly on V3....check it out.The correct one is up now….V2A is up with a shorter head and beefed-up bulkhead where the head connects. Depending on the filament you use you may need to do a little Sanding around the connection of the cap and head.I also added an angle to the bottom of the area where the head connects to the cap. I placed the cap on this angle when printing then used manual tree organic and painted the underside of the cap. Trying to find the best way to print this has been a struggle but this so far has yielded the best results. Believe I uploaded the print file with the head and cap in one but if it’s an issue let me know and I’ll upload just the cap print file and head file separately if you need it.