Slicer Discord
Radiomaster Boxer foldable antenna – 3D-printbaar model van MakerWorld MakerWorld
RC

Radiomaster Boxer foldable antenna

door randaalex · RC
62 Downloads
22 Likes
25 Makes
Model downloaden
A low-profile (10mm high), foldable antenna for the Radiomaster Boxer with adequate design To install that mod, you need to open the radio and unscrew the original antenna.mount and mount-plug needs to be glued after mount to the holder inside radio.You may use this instruction as a reference: Materials1x Foxeer ELRS 2.4GHz Receiver Antenna 15.5mm (https://www.aliexpress.com/item/1005005506134248.html)2x M3x6 button socket head cap screws2x M3 washersextra-thin gluesandpaper (optional)2.5mm drill (to fix a hole in the top part) Print SettingsMaterial: any (I printed with ASA)Infill: 100%Nozzle: 0.4mmLayer Height: 0.08mmSupports: manual (please refer to the attached picture)mount-bottom must be printed with 45 degrees
Categorie
RC
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
0.40mm lagen
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
ASA
Laaghoogte
0.4 mm
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie