Radxa Rock 5B+ (Plus) Case

40mm fan and SMA connector holes are optional punch outs. Anti choke ring for the fan included in file, in case this will be used in a backpack etc.Require 4x M3x14mm OR 4x M3x15mm OR 4xM3x16 OR 4xM3x17 screws, screw straight into plastic.Install the board before you install the SMA connectors.Includes 2 versions of the lid, one has a duct to lead the air down to the stock 4012 Radxa Rock 5B Fan (as shown in picture above). The other lid version is meant for a 4010 fan attached to the lid and custom heat sink maximum 10mm thick measured from the CPU.The version with the sim card lid requires 2xM3x3 OR 2xM3x4 screws Please comment below if there are any issues.