Radxa Zero 3w OpenIPC RubyFPV VRX / Groundstation

updated - SD card is now accessible from the rearThis is a case that holds a Radxa zero 3w and two BL-M8812EU2 wireless radios, intended for use with OpenIPC/RubyFPV on a set of goggles.Please disregard the antennas used, I'm waiting on some patches to come in the mail. I accidentally fried my VTX before I was able to fly with this so I do not know how well it handles heat, so print at your own risk. If it's too toasty I will add more ventilation Be aware that tolerances are very tight for this and you man need to use a deburring tool or an exacto knife to slightly open up certain areas depending on your printer/filament. Filament - Siraya Tech Fibreheart PET-CFPrinter - Bambu P1S.16 layer height, 3 walls, 3 top/bottom This was drawn from scratch, but was heavily influenced by the VRX posted by Romushock @ https://www.thingiverse.com/thing:6917528. My components did not fit that case so here we are. This design also offers power via either the Barrel jack or a USB C port on the