Thingiverse
Raidon Hard Disk Enclosure Wall Mount
von holisticdesign
3
Downloads
4
Likes
0
Makes
This is a wall mount for a Raidsonic RAIDON GR3660-B3 2xSATA III 3.5"/2.5" hard disk enclosure.
The holes fit four 4mm countersunk wall screws.
The Raid 0/Raid 1/JBOD switch is **intentionally not accessible**. You will have to unplug power and USB cords before taking the enclosure out.
The cut-outs for the cables are on the right side. **Please check** if that is okay for you. If needed I think I could easily add a left hand side version.
The holes fit four 4mm countersunk wall screws.
The Raid 0/Raid 1/JBOD switch is **intentionally not accessible**. You will have to unplug power and USB cords before taking the enclosure out.
The cut-outs for the cables are on the right side. **Please check** if that is okay for you. If needed I think I could easily add a left hand side version.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
