Railcore 2 Top Cover Printed Interface

*** NOTE ****

If you plan on enclosing your printer, and you have printed Z yokes, I suggest you obtain aluminum yokes or print replacements in high temp material. The washers are insufficient insulation when the printer is enclosed, and it will cause your yokes to soften, sag, and eventually fail.

*** UPDATE ***
Wade also noticed that the belt cutouts I introduced were in the corners without the cutouts for the idler and motor mounts. So I've fixed that with a new set called Belt Idler Pass Through and Mirror. YOu'll need two of each for a standard install. Again, check (like Wade) to make sure, since I don't have a 'standard' RailCore.

*** UPDATE ***
Wade noticed that I'd accidentally moved a pair of screw holes to 6.34 instead of 7.5. Fixed.

Steve London noticed that i FORGOT THE BELT CUTOUTS. Now find "BeltPass1" and "BeltPass2" which SHOULD fit the corners and pass the belts. Let me know if there are issues, as I don't have a normal belt path *anywhere* right now.