Rainier Hueforge Coaster

This is my first foray into any sort of 3d work. I have been experimenting with Hueforge software and scanned a paper coaster as a guide. Please excuse any mistakes. The Model is 100x100.24mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA Hatchbox Gold Transmission Distance: 5 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA Hatchbox White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #13 (1.12mm) swap to Gold At layer #19 (1.6mm) swap to Silver At layer #22 (1.84mm) swap to White for the rest. It is easily used with an AMS Lite. Just swap determine which slot you will use for the additional color and swap it out as it prints. I swapped out the black as soon as it finished and assigned the AMS slot