Thingiverse
Rainmeter for Home Assistant (cheap zigbee door sensor)
by pstiv
0
Downloads
0
Likes
0
Makes
Remixed to work with cheap zigbee sensors from ali like: https://nl.aliexpress.com/item/1005008646452361.html
- Funnel height augmented to accommodate sensor.
- Cradle slot for magnet displaced to the side, use this or original.
- Bottom adjusted for cheap zigbee door contact.
- Added a Bottom piece with large slit to avoid tilting errors due to surface tension.
Use a filament strand as a hinge, flatten the ends with a hot knife, if cradle doesn't rock freely, widen the holes with a 2mm drill.
Other original instructions still apply.
Can also be used with raingauge_solid_base_bracket.stl from https://www.thingiverse.com/thing:6097837
- Funnel height augmented to accommodate sensor.
- Cradle slot for magnet displaced to the side, use this or original.
- Bottom adjusted for cheap zigbee door contact.
- Added a Bottom piece with large slit to avoid tilting errors due to surface tension.
Use a filament strand as a hinge, flatten the ends with a hot knife, if cradle doesn't rock freely, widen the holes with a 2mm drill.
Other original instructions still apply.
Can also be used with raingauge_solid_base_bracket.stl from https://www.thingiverse.com/thing:6097837
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!