Thingiverse

Raise3d N2 Series Camera Mount

door Mizunoslove

3 Downloads

6 Likes

0 Makes

Inspired by wibbcat, I made my own version of a camera mount to fit my Dlink camera in Fusion360. The camera I'm using is a Dlink DCS-933L. But this mount should work with anything that has a 16 mm thread or similar. This mount requires you to remove the camera from the original stem. Once done, you will need to place this mount on top of the printer where the cable chain and USB and encased and it should snap into place. It is a tight fit, but should be easy enough to install.

Autodesk Fusion 360 DCS-933L Dlink fusion360 fusion 360 Raise3D Raise3D N2 raise3d n2 plus Autodesk Fusion 360 DCS-933L Dlink fusion360 fusion 360 Raise3D Raise3D N2 raise3d n2 plus

Bron

Thingiverse

Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid

Eendelig

Supports 1/3

Montage 0/3

Instellingen 1/3

Bedgrootte 0/3

Nabewerking 0/3

Printer

FDM / FFF

Bestandsformaat

STL

Materiaal

PLA

Software

Cura, PrusaSlicer of vergelijkbaar

Nog geen beoordelingen

Nog geen reacties – wees de eerste!

Raise3d N2 Series Camera Mount

Toevoegen aan collectie