RAK815 Enclosure

This is a simple enclosure for the RAK815 tracker. The RAK comes with an OLED screen mounted with plastic stand-offs which are miserable to work with. So in this design, you will want to detach the screen from the board and mount it inside the front of the case prior to installing the RAK board itself (which should just press fit straight down).

There are 4 mounting pillars for the OLED screen. The pillars aren't enough to hold the screen, you will want to apply some hot glue, or melt the pillars down to make nubs to keep the screen from moving.

There are nut traps in the screw pillars if you prefer to not have the screws go all the way through the case.

The case front and back are easily printed FDM, but the button pin is very small and you probably need an awesomely tuned in FDM printer to actually print nicely. I used my small resin printer for the 3 of them that I needed and it worked great.

I use PETG on this, but you could use whatever.