RASA8 Dew Shield

Used plastic glue UHU ALLPLAST.
There is a “mini dovetail” connection between the parts. This connection is “weak by design”. This enables filling the glue in between of the parts. If the connection would be strong and exact, the glue is “shifted” out when assembling.
As the parts need to be adjusted when assembling, you should not use a fast glue as the time for adjusting is too small. Even the UHU ALLPAST give you a minute or so only. Then it takes a day for hardening. Additional Parts (threaded sockets 4 x M4, 8 x M3, (length ~7mm)), a metal strip (~0.5mm) to reduce the mechanical force on the small plastic clamp parts. This strip is placed to the “small step” in the back of the clamp parts. The clamp part is then put in the base ring in the direction the metal strip points down and the skews will press on the metal strip when tightening. The cover is assembled using ~30 mm long bolts (something you can find and fit into the holes of the parts) and glue. Additional black velours