Thingiverse
Rasberry Pi 3A+ Case
door bofred
105
Downloads
38
Likes
3
Makes
A basic case for the "Raspberry Pi 3 Model A+" rasberryPi 3A + or the pi3A+ pi plus or what its called. Its so tiny and I wanted a tiny case for it. More work in progress..
- Edit. (r1) Has bigger chamfer on the top to compensate the widening effect when printing and also has minor adjustments for better fittings. Not printed yet.
- Edit, added top that can be screwed on to a surface "top_grid1_longScrews". And a top without a grid, slots and so on.
This mini computer is amazing!
I made it for 3 mm wood /plastic countersunk screws. I had some 3x12 mm screws that was a OK fit. M3 should work too if holes are threaded. But 2 - 2.5mm screws might be a better choise.
Printed in ABS with Ender 2
Also in PLA with cr10. The pla doesn't get soft from the CPU heat.
Link https://www.raspberrypi.org/products/raspberry-pi-3-model-a-plus/
- Edit. (r1) Has bigger chamfer on the top to compensate the widening effect when printing and also has minor adjustments for better fittings. Not printed yet.
- Edit, added top that can be screwed on to a surface "top_grid1_longScrews". And a top without a grid, slots and so on.
This mini computer is amazing!
I made it for 3 mm wood /plastic countersunk screws. I had some 3x12 mm screws that was a OK fit. M3 should work too if holes are threaded. But 2 - 2.5mm screws might be a better choise.
Printed in ABS with Ender 2
Also in PLA with cr10. The pla doesn't get soft from the CPU heat.
Link https://www.raspberrypi.org/products/raspberry-pi-3-model-a-plus/
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
