Raspberry Pi 2/3 and HDD Case

Dimesions first: 144 x 154 x 27 mm

As i wanted to have a Pi and a HDD in one enclosure and couldn't find one i liked, i decided to make my own. There are others but in the beginning i had in mind that i wanted to include a fan. As i want to put a 9.5mm HDD inside i modeled the standoffs on the top part for that height. There should be enough clearance for most USB-SATA adapters.

Extra parts: 1 x USB SATA cable, 1 x M3 Screw (about 10mm long)

edit: The standoffs on the top part were too long. Now they should fit.