Thingiverse
Raspberry Pi 2 Simple Enclosure
di noen
22
Download
10
Likes
0
Makes
A very simple Raspberry Pi 2 / 3 Enclosure. It uses 4 screws with countersinks in the bottom plate. This is about as simple as you can get for a full Pi enclosure.
Screws should be M2.5 to match the mounting holes for the board, or #2's should work as well.
Parts have been printed and test fitted against multiple Pi2 boards. Recommended print settings with PLA: .2mm height, 100% infill, no raft, no supports. If your printer is pretty well dialed in, you shouldn't need supports for the short overhangs. Part is designed to lose 1-3 layers and still fit well.
Providing the original 3DM source file, so feel free to adapt to your needs.
Screws should be M2.5 to match the mounting holes for the board, or #2's should work as well.
Parts have been printed and test fitted against multiple Pi2 boards. Recommended print settings with PLA: .2mm height, 100% infill, no raft, no supports. If your printer is pretty well dialed in, you shouldn't need supports for the short overhangs. Part is designed to lose 1-3 layers and still fit well.
Providing the original 3DM source file, so feel free to adapt to your needs.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
