Thingiverse
Raspberry Pi 3 + 1ch. Relay
von FieteG
21
Downloads
12
Likes
0
Makes
Simple Case for Raspberry Pi 3 + 1ch. Relay Card
Notes for Hardware (Thanks 0110-M-P)
RPi to bottom: Four #4 x 1/4" sheet metal screws
Alternative #1: M3 x 6mm (will be an extremely tight fit and is not recommended)
Alternative #2: M2 x 6mm w/ heat set inserts (McMaster #94180A312)
Top to bottom: Four #4 x 3/4" sheet metal screws (Alternative: M3 x 18mm)
Alternative #1: M3 x 18mm (will be an extremely tight fit and is not recommended)
Alternative #2: M2 x 18mm w/ heat set inserts (McMaster #94180A312)
Notes for Hardware (Thanks 0110-M-P)
RPi to bottom: Four #4 x 1/4" sheet metal screws
Alternative #1: M3 x 6mm (will be an extremely tight fit and is not recommended)
Alternative #2: M2 x 6mm w/ heat set inserts (McMaster #94180A312)
Top to bottom: Four #4 x 3/4" sheet metal screws (Alternative: M3 x 18mm)
Alternative #1: M3 x 18mm (will be an extremely tight fit and is not recommended)
Alternative #2: M2 x 18mm w/ heat set inserts (McMaster #94180A312)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
