Electronics
Go to Model
Raspberry Pi 3 B+ 3.5" touch screen case
90
Downloads
61
Likes
1
Makes
Here's a case I printed for my Raspberry Pi. No hardware is needed. Printed in PETG but ran out. Used blue pla for the cover. 70 degree support overhang, everywhere.
Parts used:
Raspberry Pi 3 B+
Touch screen hat from [Amazon](https://www.amazon.com/gp/product/B07N38B86S/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1)
This [power bank](https://www.shopmyexchange.com/5200mah-2-1a-black-power-bank/8042440) I had lying around. It measures roughly 44mm x 23mm x 96mm. Really just a happy coincidence that it slides into the back.
obviously and sd card, wireless keyboard/mouse, and a micro usb.
To assemble unplug everything including the sd card. Tip the Pi into the case USB port side first. Drop the Pi onto the pegs in the case. Plug the touch screen into the Pi. Snap the cover on. Plug everything else in. That's it!
Please excuse how terrible the vents on the back came out. I've been having issues printing in PETG lately.
Parts used:
Raspberry Pi 3 B+
Touch screen hat from [Amazon](https://www.amazon.com/gp/product/B07N38B86S/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1)
This [power bank](https://www.shopmyexchange.com/5200mah-2-1a-black-power-bank/8042440) I had lying around. It measures roughly 44mm x 23mm x 96mm. Really just a happy coincidence that it slides into the back.
obviously and sd card, wireless keyboard/mouse, and a micro usb.
To assemble unplug everything including the sd card. Tip the Pi into the case USB port side first. Drop the Pi onto the pegs in the case. Plug the touch screen into the Pi. Snap the cover on. Plug everything else in. That's it!
Please excuse how terrible the vents on the back came out. I've been having issues printing in PETG lately.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!