Thingiverse
Raspberry Pi 3 (B/B+) Easy Access GPIO Case
von omfartal
97
Downloads
78
Likes
1
Makes
The main purpose of this remix is to implement a more accessible GPIO pin section design to the original case. The original design has no easy access to GPIO pins. Pins are hardly reachable, and it is difficult to see what pin you are dealing with. To solve these problems, I redesigned the case. Now, it is much easier to use GPIO pins.
What would you need:
4x 15mm or 20mm m3 screw (to mount upper and bottom half of the case)
4x 5mm m2.5 screw (to mount Raspberry Pi)
What would you need:
4x 15mm or 20mm m3 screw (to mount upper and bottom half of the case)
4x 5mm m2.5 screw (to mount Raspberry Pi)
omfartal veröffentlicht auch auf
18 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
