Thingiverse

Raspberry Pi 3A+ camera holder

by SupraGuy

5 Downloads

1 Likes

0 Makes

A quick little mount for a Raspberry Pi 3A and a Pi camera module. Bolts together at the hinge with a 3mm screw. I had a little thumbwheel nut lying around from another project, so I used that.

The camera mounts on 2 pins and 2 screws. The Pi mounts on 4 pins. I had intended to use a soldering iron to melt the tops of the pins to keep the pi in place, but they seemed more than tight enough as printed

Quick and easy to print, add whatever kind of support you need to mount it if desired. You get about +/- 60 degrees on the camera arm.

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format