Thingiverse
Raspberry Pi 4 - Minimalistic case
von nyounossi
3
Downloads
1
Likes
0
Makes
A minimalistic case for Raspberry Pi 4 Model B.
Additional material required:
4x M2 x10mm self tapping screws
Top.stl is the standard case with access to all pins and ports.
There is an cut out just behind the RJ45 connector that provides access to 4 pins on the main board. This does make the structure a bit weak. If you don't need access to these pins then I would suggest using the TopNoHole.stl file
When printing, I laid the parts flat. This gave me the best results but please choose the orientation right for your printer and print settings.
Additional material required:
4x M2 x10mm self tapping screws
Top.stl is the standard case with access to all pins and ports.
There is an cut out just behind the RJ45 connector that provides access to 4 pins on the main board. This does make the structure a bit weak. If you don't need access to these pins then I would suggest using the TopNoHole.stl file
When printing, I laid the parts flat. This gave me the best results but please choose the orientation right for your printer and print settings.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!