Thingiverse
Raspberry Pi 4 model B OpenScad model
por rjelbert
16
Descargas
13
Likes
0
Makes
This is a model with OpenScad source code of a Raspberry Pi 4 model B. I have been designing a case for the Pi on OpenScad and needed this model to help position the holes and vents etc.
Many thanks to Niccolo Rigacci from https://www.rigacci.net/ for permission to use his Pi 3 OpenScad code as a starting point.
You can print a version of this board without the SD card and pins - just comment out the correct lines in the OpenScad code. If you want to use the model as a guide in a larger model then leave the pins and SD card code in place.
The STL file is ready to print and does not have the pins and SD card.
Note that I have discovered that the USB ports are very slightly too tall in the original design. I am going to upload a corrected version soon.
Many thanks to Niccolo Rigacci from https://www.rigacci.net/ for permission to use his Pi 3 OpenScad code as a starting point.
You can print a version of this board without the SD card and pins - just comment out the correct lines in the OpenScad code. If you want to use the model as a guide in a larger model then leave the pins and SD card code in place.
The STL file is ready to print and does not have the pins and SD card.
Note that I have discovered that the USB ports are very slightly too tall in the original design. I am going to upload a corrected version soon.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
