Raspberry Pi 4 Pi-KVM Case

This is the result of not finding a case I liked so I just made my own. I included a bunch of different tops depending if you like to have a fan, oled or logo insert. I also included a bottom that has zero text on it. This case can also supports two different sizes of HDMI to CSI-2 boards.

If it is not already obvious it is a Raspberry Pi 4 case for Pi-KVM.

The screws needed are the following.
4 x M2.5 4mm for Raspberry Pi 4
4 x M2.5 4mm for HDMI to CSI-2
1 x M2.5 4mm for USB-C/PWR Splitter
4 x M2.5 10mm for Fan
4 x M2 4mm for OLED

I used the following parts in my photos.
Raspberry Pi 4 2GB
Cable Matters Slim USB-C to USB-C 6" Cable
Waveshare HDMI to CSI-2
Geekworm HDMI to CSI-2
USB-C/PWR Splitter
Frienda 0.96" 128x64 OLED
Pi-Fan 30x30x7mm

I printed everything at 0.2mm layer height. The bottom at 20% infill and top at 60% infill. The logo insert must be printed with a -0.15mm horizontal expansion so it will fit into the top. It is a tight fit so you may need to