Raspberry Pi 5 Case - Active Cooler & NVME

I originally published this design on Printables - just expanding it's availability to makerworld as well - enjoy! My 2nd design for my Raspberry Pi 5's (with the official Active Cooler), designed on my Pi 5 using Freecad / LibreCAD. This design keeps the micro-SD card safe inside the case boundaries and provides enough ventilation to keep the temps down below throttling levels (my Pi 5 runs @ 2.8GHz and hits a maximum temp of 74C when getting hammered compiling kernels etc.). As far as I can tell this is one of the 1st Pi 5 cases that also offers a VESA mounting option (75 & 100mm). Case is kept together with hex standoffs and m2.5 screws which means you can take it apart as many times as you want to without wearing out printed mounts or breaking fragile clips. You'll need the following standoffs / screws to secure the Pi 5 in it : m2.5 x 6mm hex standoffs - 4 offm2.5 x 20mm hex standoffs (male to female) - 4 offm2.5 x 6mm screws - 8 off. I recommend using another 4 x 6mm