Raspberry Pi 5 case (with various options)

Raspberry 5 case, which assumes the standard Active Cooler is fitted, and supports the following variants:

Standard base: when using a microSD card (and no SSD)
SSD base: when using an SSD (and no microSD card)
Pi case - with IO access: giving access to GPIO, display/camera ports and microSD slot
Pi case - without IO access: fully enclosed with no I/O access, but access to microSD slot

The case is a snug fit and you need to ease the Pi in starting from the HDMI/USB-C port side. The base then clips together to hold everything in place.

If needed, you can secure the Pi to the top section mounting lugs with M2 or M2.5 screws. Or alternatively, you can secure the Pi to the top section with M2 or M2.5 standoffs (screwed through the Pi board into the mounting lugs) and then use the standoffs to secure the base section to the top section with M2 or M2.5 screws through the base holes. Note, if using M2.5 screws/standoffs