Raspberry Pi 5 Stackable Cluster Unit

This is a very useful all in one design to stack as up to 8 Raspberry Pi 5's to form a cluster unit. Note: This custom case was specifically designed to house the exact components listed under the electronic parts section which are available from Amazon, eBay and The Pi Hut. If you are new to electronics it is your responsibility to ensure you are building this safely and if in doubt seek professional help as I cannot be held responsible especially as part of the wiring will involve 240 volts from the power switch to the PSU.

There are several STL files in this project. The Pi Cluster Case Combined.STL has all the parts combined onto a thick sturdy base and the parts contained within it are fused with the base unit to avoid the need for glue. Holes have been also cut out to allow wiring from the power supply and also power switch so you will need to include some supports prior to printing. The majority of the print does not require further supports.

In addition to the main STL fi