Thingiverse
Raspberry Pi 7" Cover Mod
door Capdo
8
Downloads
6
Likes
0
Makes
So i had issues with the temperatures in my 7" Touchscreen. I just could remove the cover from the case, but i didn't want to see the Board with the cables. As a solution i made a cover by myself where the Raspberry is tranfsormed to holes. So with these Holes in my Case i could decrease the temperatures of my Raspberry.
There is no print speed defined, but i would go with something between 20-40mm/s
As a result i wanted to share my optimized cover with you.
The original case is this one:
https://www.rasppishop.de/ModMyPi-Raspberry-Pi-7-Touch-Display-Gehaeuse-Schwarz
There is no print speed defined, but i would go with something between 20-40mm/s
As a result i wanted to share my optimized cover with you.
The original case is this one:
https://www.rasppishop.de/ModMyPi-Raspberry-Pi-7-Touch-Display-Gehaeuse-Schwarz
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
