Thingiverse
Raspberry Pi 7 inch LCD stand
door AS_Motion_Lab
19
Downloads
12
Likes
1
Makes
This remix has:
- Enlarged counter bore allowing flanged screws to be used.
- Shallower bore allowing short screws be used (6mm length minimum (4mm threaded length/2mm head)
- Bottom screws have offset clearance cutout in the leg for large screwdrivers.
- Slightly more clearance around the USB port nearest to the leg (makes it stand 2mm taller)
- Slightly wider legs to recoved lost strength due to clearance hole.
Please note there is a left and a right (you can swap them around if you like) but they are mirrored, so the single STL file contains both.
- Enlarged counter bore allowing flanged screws to be used.
- Shallower bore allowing short screws be used (6mm length minimum (4mm threaded length/2mm head)
- Bottom screws have offset clearance cutout in the leg for large screwdrivers.
- Slightly more clearance around the USB port nearest to the leg (makes it stand 2mm taller)
- Slightly wider legs to recoved lost strength due to clearance hole.
Please note there is a left and a right (you can swap them around if you like) but they are mirrored, so the single STL file contains both.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
