Raspberry PI 7" screen mounts

I made these parts to be able to mount the Official Raspberry PI 7 Inch touchscreen to a electronics box. I used a 6" x 8" box. These pieces are 5.375 inches long. They are designed to have the screen on the outside of the box and then you tighten the screws down and the plastic pulls the screen tight. I did not use foam between the screen and the box but there should be enough flex to be able to do that if you would like. I did make a lower part so there is clearance for the USB cable if you are powering your RPI with it.

Check out my blog. I have just started but will be creating more things all the time.
Learn to build it