Raspberry Pi 7" Touchscreen Mount

4/21/2020 - Updated location of ribbon cable cutout. Should fit without interference. Let me know if there are any problems.

This mounts a 7" Raspberry Pi touchscreen to any printer with 2020 extrusion.

This is a frankenstein project using designs from two other creators.

New Standalone CR10 by razorbac: https://www.thingiverse.com/thing:3025180
Raspberry Pi 7" Touchscreen Display Case by luc_e: https://www.thingiverse.com/thing:1585924

Parts Required:
-Arm for left or right side of your machine. (Goes from 2020 extrusion to adapter plate) as viewed if you're looking at the front of the printer. Thanks to razorbac.
-Adapter Plate - also thanks to razorbac
-Mounting plate - thanks me
-Enclosure for the touchscreen - thanks to luc_e

(1) M4x? Screw - Attaches arm to 2020 extrusion - I'll find the grip shortly.
(1) M4 Hammer Nut - Attaches Arm to 2020 Extrusion
(1) M3x36 - Attaches adapter plate to arm
(1) M3 Nut - Attaches adapter plate to arm
(2) M4x16 Scre