Thingiverse
Raspberry Pi 7in Display Stand
di spideyk21
76
Download
42
Likes
3
Makes
Very simple two part Stand for the official Raspberry Pi 7" Touch Display. The stands tilt the Screen at 75 degrees from horizontal, and mount into the existing four mounting holes.
The Right and Left hand Stands mount to the Screen using (4) M3x0.5 x 6mm long screws. All parts were modeled in Fusion 360. F3d and Step files are available for download.
Printer Settings:
Material: PLA - 1.75mm dia.
Infill: 10%
Layer Height: .20mm
Number of Sheels: 1
Feedrate: 30 mm/s
Travel Feedrate: 30 mm/s
Print Temperature: 215 C
Bed Temperature: 60 C
Supports: none
The Right and Left hand Stands mount to the Screen using (4) M3x0.5 x 6mm long screws. All parts were modeled in Fusion 360. F3d and Step files are available for download.
Printer Settings:
Material: PLA - 1.75mm dia.
Infill: 10%
Layer Height: .20mm
Number of Sheels: 1
Feedrate: 30 mm/s
Travel Feedrate: 30 mm/s
Print Temperature: 215 C
Bed Temperature: 60 C
Supports: none
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
