Slicer Discord
Raspberry Pi B+ and 7" Display Stand – 3D-Druckmodell von Thingiverse Thingiverse
Raspberry Pi B+ and 7" Display Stand – Bild 1 Raspberry Pi B+ and 7" Display Stand – Bild 2 Raspberry Pi B+ and 7" Display Stand – Bild 3 Raspberry Pi B+ and 7" Display Stand – Bild 4

Raspberry Pi B+ and 7" Display Stand

von maddavo
205 Downloads
118 Likes
0 Makes
Zum Modell
This is a case and stand for the Raspberry Pi B+ and 7" Touch screen display. The stand has an adjustable angle.

### Hardware:###
1x Raspberry Pi B+
1x 7" Touch Screen & Display board (I got mine from Element14 at http://au.element14.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=15001&langId=43&urlRequestType=Base&partNumber=247387201&storeId=10184)
1x M4x16 screw
1x M4 nut
4x M3x8 screws
2x M3x10 self-tapping screws

### Instructions:###
1. Attach the cover to the back of the Pi/Display using the 4 M3x8 screws - ensure that the cables are all comfortably tucked in.
2. Attach the bezel to the front of the Pi/Display by inserting the top of the display into the top of the bezel and then lock into position using 2 M3x10 self-tapping screws.
3. Insert the M4 nut into the back of the cover, insert the M4 screw into the bottom of the base so it pokes out the top, then screw together.

This is probably best printed in PLA unless you are good at keeping your ABS from
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA, ABS
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

maddavo veröffentlicht auch auf

1 zusätzliche Modelle auf 1 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen